home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Ham Radio 2000
/
Ham Radio 2000.iso
/
ham2000
/
packet
/
liu95bt2
/
readme.1st
< prev
next >
Wrap
Text File
|
1995-01-23
|
1KB
|
37 lines
Installing LIU95 beta
---------------------
hopefully you will be reading this before you install anything!
before you start it would be a good idea to make sure you have the following
files in the correct directory:
VBRUN300.DLL in \windows\system
this file can be found on this disk,if you don't have it.
BPQCODE.EXE version 4.07b or higher in your BPQ directory
BPQv4.08 is all ZIPped on this disk,if you havn't used BPQ before,
simply copy BPQ408.ZIP into C:\BPQ and unzip, read the docs,and edit
the relavant configuration file,make sure it all works fine before
proceding.
If you havn't used BPQ before,it may look a bit overwealming at first,but
basically all you need to do in most cases is Edit BPQCFG.TXT with a normal
text editor,run BPQCFG.EXE to compile it, then just to test it, run SWITCH.EXE
you can then try out the commands,to make sure everything is working.
Then you need to run BPQCODE.EXE (prefrebly from your AUTOEXEC.BAT)....then
run windows....IT MUST BE LOADED BEFORE WINDOWS.
Now to the Installation of LIU95.....
1. make sure the install disk is in drive A:
2. run windows
3. run A:\SETUP.EXE using the program manager or file manager
4. Read the MANUAL.WRI in the directory you installed LIU95 which
tells you how to configure LIU95 for your system,and how to use it.